Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Furnace 040 MBH 15.5 SEER2 V8
Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Furnace 040 MBH 15.5 SEER2 V8
Kit Includes PVC Ptrap Kit, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat, Disconnect
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Furnace 040 MBH 15.5 SEER2 V8
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
- Heating Input (BTUH):
- 040 MBH Heat
- Includes:
- H4A7T24AKAWA, N96VSN0401712A, EVD4X24M17A, ACGKIT2
- Nominal Capacity (BTUH):
- 24000
- Cooling Efficiency (EER2):
- 12
- Cooling Efficiency (SEER2):
- 15.5
- Heating Efficiency HSPF2:
- A/C is Energy Star 6.1 compliant
- System Indoor Type:
- Gas Furnace
- System Outdoor Type:
- Multi Stage
- System Coil Configuration:
- Vertical Power "V
- Furnace Efficiency:
- 96
- System Nominal Tons:
- 2
- AHRI System Number:
- 210694834
A/C, Single Phase, Split Gas Furnace Multi Stage, Vertical Power "V" H4A7T/N96VSN/EVD4X
Air Conditioner Condenser
Air Conditioner Condenser
- 2 Stage Copeland Scroll Ultratech Compressor
- Welded Aluminum Tube / Aluminum Fin Coil
- Improved Efficiency w/ Multi Directional Internal Enhancements
- Less Sensitivity to Pressure Drop
- Heat Shrink Wrap Protects Copper / Aluminum Joints
- AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
- Approximately 50% Lighter than Copper Coils
- Filter Drier Supplied for Field Installation
- Self Configuring Operation & Text Based Diagnostics w/ Ion Control
- Compressor Sound Blanket & Isolation Grommets Factory Installed
- Extended Service Valve to Accommodate Press Fittings
- High & Low Pressure Switches
- Outdoor Temp Sensor Factory Installed
- Factory Charged w/ R410A Refrigerant
- Long Line Set Capability (refer to spec sheet for details)
- Low Ambient Cooling Capable w/ Optional Kit
- Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
- Corner Posts for Added Cabinet Strength
- Coated Hail Guard Coil Protection
- Post Painted (black) Coil
- Coated Cabinet Screws
- Internal Pressure Relief Valve & Thermal Overload
Gas Furnace
- Fully insulated steel cabinet
- Dehumidification feature in cooling
- Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressured to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed
- VCT Constant Torque Variable Speed Motor
- Supports Single & Two Stage A/C
- Aluminized steel RPJ primary heat exchanger
- Stainless Steel Secondary Heat Exchanger
- Direct ignition with Silicon Nitride ignitor
- Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
- 35” (889mm) high, for ease of installation
- Four position - upflow/downflow/horizontal (left/right) installation
- At least twelve different venting configurations
- Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
- Self diagnostics with super bright LED
- Concentric vent available
- Twining capable (select sizes) w/ kit
- Corrosion Resistant Aluminum
- Low Pressure Drop
- TXV metering device factory installed
- Compact design, shorter than A-coils
- Hemmed flanges for safer handling
- Cabinets meet or exceed 2% air leakage codes
- UV knockout
- No delta plate allows easy cleaning
- 30-40% Lighter than “A” Coils
- 80% Fewer Factory Braze Joints vs. “N” Coils
- V Design Reduces Cabinet Sweating
- Helium leak tested @ the factory
